Operating Instructions and Installation Instructions

406342

“h” will ﬂ ash. This is to warn you that the cooking zone may still

be hot, but not necessarily, depending on how long the power

supply was out of order.

The appliance has been tested at the factory. This test

includes heating up all cooking and warming zones;

therefore, “H” symbol may ﬂ ash on the display for

a while after the appliance is ﬁ rst connected to the

power mains.

When this function is activated, the cooking zone will operate at

the highest possible level for a certain period of time, depending

on the selected power level; after this, the cooking zone will

automatically switch to the initially selected level and continue

operating. Automatic cooking can be activated on each cooking

zone, for any cooking level except for »9« (where the power is set

at the maximum level throughout) or the reheating function

Activating the power boost function

• Select the desired cooking zone (D).

• Set the value »0« on the slider (F) and then press the slider

(without sliding) at the far right. »A« and »9« will be displayed.

• Use the slider (F) to decrease power to the desired level.

The symbol “A” and the selected power level will be indicated

alternately on the display. When the power boost function

has expired, the cooking zone will switch automatically to the

selected level which is then indicated permanently on the display.

Early deactivation of the rapid heating function

• Select the desired cooking zone.

• Use the slider to set the power level to 0 and then set

the desired cooking level.

Power boost function

GDH D G

LKKEE