Operating Instructions and Installation Instructions

406342

• After the set time has expired, acoustic signal will be activated

and the cooking zone will be switched off. »00« will ﬂ ash on

the clock display. Switch of the alarm by touching any key;

alternatively, it will switch off automatically after a certain

period of time.

Cooking time can be set for each cooking zone

independently. If several timers have been

programmed, the time that is closest to zero will

always be displayed. This is indicated by a ﬂ ashing

signal light (L) which indicates the cooking ﬁ eld.

Changing the timer setting

• Timer setting can be changed any time during operation.

• Touch the power-off timer key (D) to select the timer display for the

desired cooking zone. The relevant signal light (K) will ﬂ ash.

• Touch the slider (F) to set a new desired cooking time.

Checking the remaining cooking time

If several timer settings are activated, remaining cooking time

can be displayed by touching the (G) key.

Timer reset

• Select the desired timer display by pressing the (G) key (see

section Changing the set cooking time). The set timer will be

displayed and the dot indicating the relevant cooking zone will

light up.

• Use the slider (F) to set the value to »00« or press the left and

right edge of the slider (F) simultaneously to immediately reset

the value to »00«.

The stay-warm zone is intended for keeping warm the pots or

pans containing cooked meals. It is not intended for cooking or

reheating of cold food.

The stay-warm zone is warmed slowly to a temperature of

around 100°C. Therefore, make sure you do not touch it to

prevent any burns, and do not place any heat-sensitive objects

onto it.

Activating the stay-warm zone

• The cooking hob must be activated.

• Touch the stay-warm zone activation key (M). Signal light (N)

will light up. The stay-warm zone is switched on.

GDH D G

LKKEE

Stay-warm zone

(SVK8… - 850 mm)