Operating Instructions and Installation Instructions

406342
• Cooking hobs can be installed into worktops that are 30 to 50
mm thick.
• The kitchen furniture element underneath the hob should not
be fi tted with a drawer. If the kitchen furniture element as a
horizontal partition wall, it should be installed no less than 60
millimeters from the lower surface of the worktop. The space
between the partition wall and the hob must be empty; no
objects should be placed into that gap.
• On the furniture back wall there should be a cutout with width
of at least 175 mm along the entire width of the furniture
element.
• Only type EVP4..,EVP2.., ovens fi tted with a cooling fan may
be installed underneath this cooking hob.
Installation procedure
• The worktop should be installed completely horizontally.
• The cutoff surfaces should be appropriately protected.
• Attach the fastening elements (4x - SVK6…600 mm; 6x
- SVK7…750 mm; 6x - SVK8…850 mm) with the supplied
screws (4x - SVK6…600 mm; 6x - SVK7…750 mm; 6x
- SVK8…850 mm) to the left and right wall of the cooking hob
and the worktop cutoff.
• Connect the cooking hob to the power mains (see instructions
for connecting a cooking hob on a power network).
• Insert the cooking hob into he cutoff and press it heavily from
above against the worktop.
• For screwing down the fi xing clip it is not allowed to use
screws longer than 6,5 mm.
19