Operation Manual

136356
• Warming up hotplate is intended for keeping dishes with
already cooked food on a warm plate. It is not intended for
cooking or for heating of cold food.
• The hotplate is switched on and off by touching the relevant
sensor. When the hotplate is active the signal LED above the
sensor is on.
• Warming-up hotplate warms up slowly and reaches the
temperature of around 100° C, so beware of burns, and do not
place any temperature sensitive objects upon its surface.
• This function mode is intended as a protection against
accidental start or change of heating power by children or pets.
The hob may be blocked by pressing the relevant sensor for
about 3 seconds, illuminating the LED signal lamp above the
sensor. The hob may be blocked both with the hob switched
on or off. The functioning of the complete hob is blocked,
except for the main hob switch and the blocking sensor.
In the blocked mode, particular hotplate may be switched off
by simultaneously pressing the (+) and (-) sensor, or switch off
all hotplates by pressing the main ON/OFF hob sensor. If you
attempt to activate a particular sensor in the blocked mode,
the signal lamp goes on for a few seconds and a sound signal
is heard. If a particular hotplate is in timer automatic mode, the
countdown proceeds normally and the hotplate is switched off
at the expiry of preset time.
The blocked mode may be switched off at anytime by pressing
the sensor. Short beep confi rms the action, and the LED signal
lamp goes off.
• Particular hotplate is switched off either by pressing the sensor
(-) to bring the heating power to “0”, or by simultaneously
pressing both the (+) and (-) sensor. Hotplate is switched
off automatically after the set timer period elapses. Display
indicates “0” for a short time, then the hotplate is switched off
and the indicator displays the remaining heat “H”.
27
Warming up hotplate
Blocking the hob
operation
Switching the hotplate
off