Operation Manual

ManualsBrandsGorenje ManualsHobgns 64 e inox

Instructions for Use, Building- in and Connecting

Gas built-in cooking hob

Dear Buyer,

This electric built-in cooktop is manufactured for

household use.

Our appliances are packed in the environmentally

friendly materials which may be recycled,

deposited or destroyed without any hazard to the

environment. Such packaging materials are also

labeled accordingly.

Once the life cycle your appliance is over, make

sure not to pollute the environment, and deliver it

to the authorized collectors of old household

appliances

Instructions for use

Instructions for use have been prepared for the

user, and describe the appliance and the way it is

handled. These instructions are intended for

various types of the appliance, so you may find

some descriptions for the functions that your

particular appliance may not have.

Instructions for connecting the

appliance

The connections must be carried out in

accordance with the instructions supplied with the

appliance, and in compliance with the recognized

standards.

Connections must be performed by qualified

personnel only.

Rating plate

Rating plate with the basic information is fixed to

the bottom side of the hob.

Contents

Safety precautions........................................... 4

Technical information .................................... 4

Safety cautions in regard to the cooking zones

Ignition and operation of burners

Cookware

Cleaning and maintenance ............................. 7

Cooktop burners

Troubleshooting guide .................................... 8

Note

Important

Installation instructions .................................. 9

Caution !

Dimensions of the built-in hob opening

Installation procedure

Connecting the cooktop to the gas supply... 11

Safety precautions

Connections

Conversion to another type of gas

Setting elements

Nozzle chart

Summary of content (11 pages)

PAGE 1
Gas built-in cooking hob Dear Buyer, Instructions for use This electric built-in cooktop is manufactured for household use. Our appliances are packed in the environmentally friendly materials which may be recycled, deposited or destroyed without any hazard to the environment. Such packaging materials are also labeled accordingly.
PAGE 2
Safety precautions • To avoid any possible hazard, the appliance may be installed by qualified personnel only. • Operation of gas burners normally releases heat and humidity into the room, so that the location in which the gas cooker is installed must be properly ventilated. Open door or window should in most cases prove adequate, but if the appliance should operate powerfully for a prolonged period this should call for stronger ventilation or the operation of the kitchen hood.
PAGE 3
Description of the appliance Cooking burners are controlled by the relevant control knobs. Heating power is indicated on the knobs by the large flame symbol and the small flame symbol. Always turn the knob over the large flame position towards the small flame position and back. The operating position is always between the two flame symbols.
PAGE 4
Ignition and operation of burners Gas burners may be ignited with the electric ignition device, built-in adjacent to each burner. • To switch the gas burner on press the relevant cooking control button, and turn it to the large flame symbol position . • Press the knob towards the control panel and turn it to the large flame position . Press the ignition knob a few times - (some models only) (or use a match), until the burner lights.
PAGE 5
Cleaning and maintenance The appliance should be cleaned with warm water, liquid detergent and soft cloth. Never use aggressive cleaners and sharp objects. Burned or dried food particles should be moistened with a wet cloth and softened with an appropriate cleansing agent. Stainless steel surfaces must be cleaned with special cleaners for stainless steel. Apply a fine layer of the cleaner with a dry, well absorbing cloth to the dried and cool surface, and rub in the direction of the surface treatment.
PAGE 6
Troubleshooting guide Repairs may be done by qualified personnel only. Any unskilled attempt to repair the appliance is extremely dangerous. Before attempting any repairs disconnect the appliance from the mains by removing the fuse or unplugging the mains lead from the mains socket. Any unskilled attempts and/or repairs may cause electric shock and short circuit. To avoid such injuries any repairs may be performed only by qualified personnel or after sales service.
PAGE 7
Installation instructions Caution ! • To avoid any possible hazard, the appliance may be installed by qualified personnel only. • This appliance must be installed in accordance with the latest versions of BSG172, BS5440: Part 2 and BS6891 standards. • Panels and furniture lining of the kitchen cabinet receiving the hob must be treated with temperature resistant adhesives (100°C), otherwise they might be discoloured or deformed because of inadequate temperature resistance.
PAGE 8
Connecting the cooktop to the mains power supply Open the connector by means of screwdriver and slightly push it downwards. Electric connection may be carried out by qualified service personnel only! Wrong connection may permanently damage parts of the appliance and render your warranty void! Prior the connection make sure the voltage from the rating plate agrees with the existing mains voltage supply.
PAGE 9
Connecting the cooktop to the gas supply Safety precautions Connections • The appliance must be connected in accordance with the standing ragulations, and it may be used only in well ventilated rooms. Before any attempt to connect the appliance read carefully the instructions! • Before installation and connection check if the local connection specifications (type and pressure of gas) correspond to the specifications of the appliance.
PAGE 10
Conversion to another type of gas • For the conversion procedure the appliance need not be pulled out from its location. • Before starting to work on conversion, disconnect the appliance from the mains and shut the gas inlet valve. • Replace the existing nozzles of declared nominal heat input with adequate nozzles for the new type of gas (see table). • Adjust the nozzle for the minimum heat input rate as long as it requires to arrive at the minimum heat input.
PAGE 11
Nozzle chart Gasart Wobbezahl Natural gas A p=8mbar Wo=22,4÷ 24,8 MJ/m3 Natural gas B p=8 mbar Wo=24,8÷ 31,4 MJ/m3 Natural gas H Natural gas E p=20 mbar Wo=40,9÷ 54,7 MJ/m3 Natural gas L p=25mbar Wo=39,1÷ 44,8 MJ/m3 Natural gas L Natural gas LL p=20 mbar Wo=39,1÷ 44,8 MJ/m3 Liquid gas p=50 mbar 3B/P Wo=72,9÷ 87,3MJ/m3 Liquid gas 3+, 3B/P p=30 mbar Wo=72,9÷ 87,3MJ/m3 Auxiliary burner max min Nominal heat input (kW) Consumption (l/h) Nozzle num.