Operation Manual

Instructions for Use
21
Description of the Appliance
Refrigerator (A)
Refrigerator is used for storing fresh foods for few
days.
Freezer (B)
Freezer is used for freezing fresh foods and for
storing already frozen foods.
Shelf (1)
(number depends on the model)
Shelf can be optionally placed on the guides
inside the appliance. It is protected against pulling
out. If you want to remove it, slightly lift up the
back part and pull it out.
Glass shelves (some models only have them) are
protected with plastic spacers. Before pulling the
shelf out, spacers must be moved towards you.
Spacers can be also removed, however, it is
better to keep them for any later transport.
Quickly perishable food should be stored on the
back i.e. the coldest part of the shelves.
Bottle rack
(in some models only)
Bottle rack (number depends on model) is
intended for storing the bottles. There are two
installation positions available (horizontal or lifted
in the front) thus enabling the positioning of
bottles on the stopper as well.
It is protected against pulling out. If you want to
pull it out, simply lift its rear part and pull it
towards you.
Warning!
If the door contains storing shelves, install the
rack in such position that the length of the bottles
will not hinder the closing of the door.
The rack may carry 9 bottles of 0,75 l or more at
the maximum (total weight max. 13 kg) – note the
label underneath the thermostat box inside the
appliance.