Instruction manual

CLEANING THE APPLIANCE

413758

Before cleaning, unplug the appliance from the power mains – switch off the appliance

(see chapter Switching the Appliance On/Off) and unplug the power cord from the wall

outlet.

• Use a soft cloth to clean all surfaces. Cleaners that contain abrasive substances, acids,

or solvents are not suitable for cleaning as they may damage the surface.

Clean the appliance exterior with water or a mild solution of suds. Lacquer-coated and

aluminium surfaces may be cleaned with lukewarm water to which you have added a mild

detergent. Use of cleaners with low alcohol content is allowed (e.g. window cleaners).

Do not use cleaners containing alcohol for cleaning plastic materials.

Appliance interior can be cleaned with lukewarm water to which you can add some

vinegar.

• A gutter and an opening through which

the water from thawed ice ﬂ ows are

located underneath the cooling panel that

cools the refrigerator interior. The gutter

and the opening may not be clogged.

Inspect them often and clean if necessary

(e.g. with a plastic straw).

• Frost or ice build-up, 3-5 mm thick, will

increase power consumption. Therefore,

it should be regularly removed (does not

apply to NO FROST freezer). Do not use

any sharp objects, solvents, or sprays.

• The condenser unit mounted on the

(exterior) back wall should always be

kept clean, free of dust or deposits

resulting from kitchen smoke or fumes..

Occasionally clean the dust using a soft

non-metal brush or a vacuum cleaner.

• After cleaning, switch the appliance back

on and insert the food.