Operation Manual

142468

• Place the appliance in dry and well aired room. The appliance

operates best at temperature ranges indicated in the chart

below. Relevant class of the appliance is indicated on the

rating plate.

Class Ambient temperature

SN (subnormal) from +10°C to +32°C

N (normal) from +16°C to +32°C

ST (subtropical) from +16°C to +38°C

T (tropical) from +16°C to +43°C

Positioning the appliance requires two persons in order to avoid

injuries or damage to the appliance.

• Place the appliance ﬂ atly and ﬁ rmly on a solid base. The

appliance is ﬁ tted with adjustable feet on the front side, used

to level the appliance. Rear side of the appliance is ﬁ tted with

wheels (certain models only) facilitating the positioning of the

appliance at the preselected place.

• The element above the appliance must be at least 5 cm away

to allow sufﬁ cient cooling of the condenser.

• Two spacers attached to the appliance must be ﬁ tted onto the

upper edge of the condenser, thus preventing the appliance

from being installed too close to the wall (only some models

have it). Spacers are manufactured for all-purpose function

depending on the distance of the condenser from the

appliance. Therefore turn spacers correspondingly and ﬁ x

them to the appliance.

• Avoid exposing the appliance to direct sunlight or heat

sources. If this is not possible, install insulation plate between

the appliance and adjacent heat source.

Selecting the location

Positioning the

appliance

Installation and connection