Operation Manual

ManualsBrandsGorenje ManualsHouseholdUWD1400

Table of contents

Protection of the environment

Description of warming drawer

Safety tips

Installation

Encasement

Using your warming drawer

Cleaning and maintenance

PROTECTION OF THE ENVIRONMENT:

The packaging materials used for this appliance can be recycled. Take part in recycling

and help protect the environment by discarding them in the appropriate waste bins

provided by the municipal authorities.

The symbol on the product or on its packaging indicates that this product may not

be treated as household waste. Instead it shall be handed over to the applicable

collection point for the recycling of electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent potential negative consequences

for the environment and human health, which could otherwise be caused by

inappropriate waste handling of this product.

For more detailed information about recycling of this product, please contact your local

city office, your household waste disposal service or the shop where you purchased

the product.

Summary of content (9 pages)

PAGE 1
EN Table of contents Protection of the environment Description of warming drawer Safety tips Installation Encasement Using your warming drawer Cleaning and maintenance PROTECTION OF THE ENVIRONMENT: The packaging materials used for this appliance can be recycled. Take part in recycling and help protect the environment by discarding them in the appropriate waste bins provided by the municipal authorities.
PAGE 2
Description of warming drawer 1. Timer, stop/start switch 2. Signal light on the front showing that power is on 3. Temperature control 4. Drawer for dishes 5.
PAGE 3
Safety tips Keep these instructions with your appliance. If the appliance should be sold or given to another person, be sure that these instructions are supplied with it. Please read these recommendations before installing and using your warming drawer. They have been drafted for your safety and that of others. This warming drawer has been designed for use by private persons in their homes. It is intended exclusively for warming dishes. Any other use is prohibited and could be dangerous.
PAGE 4
Installation Before connecting the appliance to the power supply, check that the wires of your electric installation have sufficient diameter to supply power to the appliance normally. The fuse for the installation should be 10 amps. It is necessary to provide a bipolar cut-off device in the power supply circuit, with an open contact gap of more than 3 mm. The electric connection should be done before the appliance is set in the cabinet.
PAGE 5
Encasement Set the appliance into the niche in the cabinet. Make certain that the body of the appliance is positioned correctly. Open the drawer and fasten the appliance to the sides of the cabinet with 4 screws and the 4 spacers delivered with the appliance.
PAGE 6
Using your warming drawer INFORMATION BEFORE USE: The appliance should be used exclusively to preheat dishes. The appliance uses a hot air system to heat the dishes. A fan distributes the heat from the resistor in the drawer. The dishes are heated rapidly and uniformly by circulation of hot air. A protective grid prevents the dishes from coming into contact with the resistor or the fan. The floor of the drawer is covered with an antiskid mat that prevents the dishes from sliding when the drawer is opened.
PAGE 7
Using your warming drawer SELECTING THE TEMPERATURE: The temperature knob adjusts the temperature between 30 and 70 °C. The most appropriate temperatures for the types of dishes used are as follows : - 40 °C: for cups or glasses. Hot drinks stay hot lon ger when poured into cups or glasses preheated to this temperature, without danger of burns when people drink from them. - 60 °C: for plates and dishes.
PAGE 8
Using your warming drawer CAPACITY: Capacity depends on the height of the model, and the weight and size of your dishes. The model has maximum capacity of 20 kg.
PAGE 9
Cleaning and maintenance Before any maintenance, turn off the appliance and let it cool. Clean all surfaces with a sponge, dish washing soap and warm water. Then dry it off with a soft cloth. Do not steam clean the alliance. The use of scouring powders, alcohol or grease-cutting products is not recommended – they could damage the appliance. The stainless steel front can be scratched. Use a special non-abrasive cleanser for stainless steel. The antiskid mat can be removed to clean the bottom of the drawer.