EN DETAILED INSTRUCTIONS HOW TO USE YOUR WASHING MACHINE
We thank you for your trust and the purchase of our washing machine. Your new washing machine complies with the requirements of modern laundry care. Your laundry will be impeccably white even at low temperatures, owing to special washing programs like Ultra White. SensoCare technology allows simple control of the washing machine. Your washing machine is highly economical when it comes to use of power, water, and detergent.
Table of contents 4 SAFETY PRECAUTIONS INTRODUCTION 8 WASHING MACHINE 9 Technical information 10 Front panel 12 12 13 13 15 16 16 17 18 19 19 INSTALLATION AND CONNECTION Removal of transport brackets Selecting the room Installation Water inlet connection Aqua-stop Total aqua - stop Water outlet connection Connect the appliance to the mains supply Moving and transport Subsequent transport PREPARING THE APPLIANCE FOR THE FIRST USE 20 BEFORE THE USE 21 21 22 24 27 29 31 31 WASHING STEPS (1 - 7) 1.
SAFETY PRECAUTIONS Please, do not use the washing machine without reading and understanding these instructions or use first. Be sure to remove transport brackets prior first use of the appliance. Attempted operation of the blocked machine may result in irreparable damage which is not covered by the manufacturer’s warranty! When connecting your washing machine to water supply, be sure to use the supplied water inlet hose and sealing gaskets.
Leave any repairs and similar tasks on the washing machine to an expert. Unprofessional repair may result in an accident or major malfunction. The warranty shall not apply to consumables, minor discoloration or deviations of colour, increased noise level as a consequence of appliance age, which does not affect appliance functionality, and aesthetical deficiencies which do not affect appliance functionality or safety. The appliance is intended exclusively for use in households.
CHILDREN UNDER 3 YEARS SHOULD BE KEPT AWAY FROM THE MACHINE UNLESS THEY ARE NOT CONSTANTLY SUPERVISED AT ALL TIMES. THE APPLIANCE IS MANUFACTURED IN COMPLIANCE WITH ALL RELEVANT SAFETY STANDARDS. THIS APPLIANCE CAN BE USED BY CHILDREN AGED FROM 8 YEARS AND ABOVE AND PERSONS WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES OR LACK OF EXPERIENCE AND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING USE OF THE APPLIANCE IN A SAFE WAY AND UNDERSTAND THE HAZARDS INVOLVED.
BEFORE CONNECTING THE WASHING MACHINE Carefully read the instructions for use before connecting the washing machine. Repair or any warranty claim resulting from incorrect connection or use of the washing machine shall not be covered by the warranty. The appliance is to be connected to the water mains using new hose-sets and that old hosesets should not be reused. 392477 To avoid hazard, damaged power cord may only be replaced by the manufacturer, authorized service technician, or other authorized person.
WASHING MACHINE (WASHING MACHINE DESCRIPTION) FRONT 1 2 3 4 1 2 Front panel Dispenser Door Filter 3 4 BACK 1 2 3 4 Water inlet pipe Power cord Water discharge pipe Adjustable feet 2 3 1 4 4 4 392477 8 4
TECHNICAL INFORMATION (DEPENDING ON THE MODEL) The rating plate with the basic information on the washing machine is located under the washing machine door.
FRONT PANEL 2a 3a 2b 1 2c 2 1 Washing machine ON/ OFF and program SELECTOR DIAL 392477 10 3 2 3 2a ECOcare 2b ALLERGYcare 2c TIMEcare 3a SIGNAL LIGHTS for indicating the WASHING TEMPERATURE/ for COLD WASH a , b, c WASHING STYLE keys (SensoCare) WASHING TEMPERATURE key
5b 6a 4a 6b 5a 6c 4 4 5 SPINNING RPM / PUMP / STOP PUMP key 4a SIGNAL LIGHTS for displaying the SPINNING RPM/PUMP OPERATION/ PUMP STOP 5 7 6 6 a , b, c ADDITIONAL FUNCTION keys 6a Prewash 6b Extra water 6c SterilTub 7 START/PAUSE key Use this key to start or stop the program. When the machine is turned on, the signal light on the key starts to flash; when the program is started, it is lit continuously.
INSTALLATION AND CONNECTION REMOVAL OF TRANSPORT BRACKETS 1 Move the pipes. Loosen screws at the rear of the machine. 2 Remove the brackets. 3 Slide brackets into the groove on the blocking rod - the right one should be turned around. 4 Close the openings with attached plastic pegs. Use the brackets to rotate blocking rods for 90° and pull them out. Be careful to prevent personal injury. In removing the wrapping be careful not to damage the appliance with a sharp object.
SELECTING THE ROOM The appliance should be placed on a surface with concrete base; the surface should be dry and clean in order to prevent slipping. The adjustable feet should also be cleaned before installation. INSTALLATION Use a water scale and spanner No. 32 (for feet) and 17 (for the nut). 1 Put the appliance in horizontal position by turning the adjustable legs. The legs are adjustable up to +/1 cm.
If you have a tumble dryer of the same dimensions, you can place it on top of the washing machine by using the vacuum feet or side by side. 4X Before connecting the appliance, let it warm up to room temperature (wait at least two hours).
WATER INLET CONNECTION Insert the gasket with a filter net into the straight inlet hose attachment nut and screw the nut onto the water tap (with some models, the gasket with filter net is already fitted and any additional fitting into the nut on the straight attachment is not required). A A AQUASTOP B B TOTAL AQUASTOP C REGULAR ATTACHMENT C To ensure correct operation of the appliance, water pressure inlet must be between 0,05 and 0,8 MPa.
AQUA-STOP (CERTAIN MODELS ONLY) In case of damage on the interior pipe, leaking is prevented by automatic closing system which stops water inlet to the machine. In such cases display (A) turns red. Inlet pipe must be replaced. A TOTAL AQUA - STOP (CERTAIN MODELS ONLY) In case of damage on the interior pipe, leaking is prevented by automatic closing system which stops water inlet to the machine. Protection system will also detect whether there is any water leakage in the washing machine interior.
WATER OUTLET CONNECTION Fix the drain hose to run into the sink or the bathtub, or connect it directly to the wall drain outlet (diameter min. 4 cm). The end of outlet hose should be placed between minimum 60 cm and maximum 100 cm above the floor level. It can be attached in three ways (A, B, C). max 150 cm Outlet hose can be led into a wash basin or a bathtub. Use a string to attach the hose to the opening in the elbow support to prevent it from slipping to the floor.
CONNECT THE APPLIANCE TO THE MAINS SUPPLY 2h After it is installed for the first time, the washing machine should be left to stand still for two hours before it is connected to the power mains. Use the power cord to connect the washing machine to the power mains through a power outlet. The washing machine may not be connected to the power mains through an extension cable (danger of overheating and fire). Nominal voltage and other information is given on the rating plate located under the door frame.
MOVING AND TRANSPORT After transport, the washing machine should be left to stand still for at least two hours before it is connected to the power mains. We recommend that installation and connection should be done by a qualified person. Before connecting the appliance, read the instructions for use. Repair or any warranty claim resulting from incorrect connection or use of the appliance shall not be covered by the warranty.
BEFORE THE USE Open the door of the unplugged washing machine by pulling the lever towards you. 1 2 Clean the washing machine drum before using the appliance for the first time. Use a damp cloth and a mild cleaning agent, or run the selfcleaning program.
WASHING STEPS (1 - 7) 1. STEP: CHECK THE TAGS ON YOUR LAUNDRY Normal wash Delicate wash Whitening Max. washing 95°C Max. washing 60°C Max. washing 40°C Max. washing 30°C 95 60 40 30 95 60 40 30 Whitening in cold water Manual washing Washing not allowed Whitening not allowed c1 Dry cleaning Dry cleaning in all solvents A Perchloretyhlene R11, R113, Petrolej P Dry cleaning in kerosene, in pure alcohol and in R 113 Dry cleaning not allowed Ironing Hot iron max. 200°C Hot iron max.
2. STEP: PREPARING THE WASHING PROCESS 1. 2. 3. 392477 22 Sort the laundry by type of fabric, colour, soiling, and allowed washing temperature (see Program table). Close the buttons and zippers, tie any ribbons, and turn the pockets inside-out; remove any metal clips that could damage the laundry and washing machine interior, or clog the drain. Place very delicate laundry and small items in a special protective sack. (The special-purpose textile bag is available separately.
SWITCHING ON THE WASHING MACHINE Connect the washing machine to the power mains using the power cord, and connect it to water supply. To light up the drum (certain models only), rotate the program selector dial to any position. 1 2 LOADING THE WASHING MACHINE Open the door of the washing machine by pulling the lever towards you. Load the laundry into the drum (check that the drum is empty). Close the door of the washing machine.
3. STEP: CHOOSING A PROGRAMME To select a program, rotate the program selector dial to the left or to the right (according to the type or how soiled the laundry is). See Program Table. 1 1 During operation, the dial will not rotate automatically. Washing programs are entire programs that include all washing stages, including conditioning and spinning.
PROGRAM TABLE Program: Cotton – 95 °C Mix/Synthetics ; 30 °C – 60 °C Hand Wash / Delicate ; 30 °C – 40 °C Max. load Type of laundry Non-sensitive cotton and linen laundry (towels, underwear, T-shirts, terry towelling and underwear, stockinette, 7 kg"/ 6,5 kg"/ tablecloths, kitchen cloths etc.). 6 kg"/ 5 kg" 9 kg/ 8 kg/ 7 kg/ 6 kg 3,5 kg / 3,5 kg/ Coloured laundry (of like colours) 3,5 kg/ made of durable mixed fabrics 3 kg (trousers, T-shirts, dresses etc.
Program: Perfect Black 30 °C Ultra White 30 °C Partial programs Rinse Softening Spinning/ Pumping Max. load Type of laundry Possible combinations 2,5 kg/ 2,5 kg/ Dark laundry using special2,5 kg/ purpose detergents for black 2,5 kg laundry, with gentle tumbling and lower spinning rates 2 kg"/ 2 kg"/ 2 kg"/ 2 kg " • spinning • pump stop • normal 2,5 kg/ 2,5 kg/ Delicate, slightly soiled laundry 2,5 kg/ like bras, lace underwear, using 2,5 kg special-purpose detergents for white delicate laundry...
4. STEP: CHOOSING THE SETTINGS Each program features basic settings which, however, can be changed. To change a setting, press the relevant key (before pressing the START/PAUSE key). Some settings cannot be selected with some programs; an acoustic signal and a flashing light will remind you of such cases (see Program Table). 6a 6b 6c 2 2 3 4 5 Washing style NORMALcare (basic settings) ECOcare (energy-saving wash – longer washing time, less water).
4 Spinning To change the spinning rate by steps, from the rpm rate that was preset on the selected program down to “ ” (pumping the water, without spinning). The last setting is “ ” (pump stop) – the laundry remains soaked in water from the last rinse. Use this option if you wish to prevent creasing of the laundry when you know you do not have the time to take it from the washing machine immediately after the washing program is completed. Light next to the selected spinning rpm is lit.
5. STEP: SELECTING ADDITIONAL FUNCTIONS To activate/deactivate a function, press the relevant key (before pressing the START/PAUSE key). 6a 6b Some functions cannot be selected with some programs; an acoustic signal and a flashing light will remind you of such cases (see Program Table). 6c 6a Prewash Washing heavily soiled laundry, particularly with stubborn superficial stains. 6b ExtraWater Washing with an extra amount of water and an additional rinse with some programs.
ACOUSTIC SIGNAL Select the acoustic signal loudness by simultaneously pressing the (6c) key and rotating the program selector dial (1) clockwise to the initial position. Each time a key is pressed, the final loudness level is changed (three levels; press the 6a key to increase the setting and 6c to decrease it.). Confirm the selection by pressing the (6b) key. Selected loudness (sound volume) level is indicated on the display unit. The most recent setting is stored.
6. STEP: PROGRAM START Press the (7) key START/PAUSE. Time remaining to the end of the program or start delay time (if set) will appear on the display. Signal lights on the selected functions will be lit. After pressing the START/PAUSE key, you may adjust the spinning speed and activate or deactivate the child lock; other settings, however, cannot be changed. 7. STEP: END OF WASHING PROGRAM End of washing program will be signalled by an acoustic signal; "End" will appear on display.
CLEANING AND MAINTENANCE Disconnect the washing machine from the mains before cleaning! Do not allow children to clean the appliance or perform any maintenance tasks without proper supervision! CLEANING THE DETERGENT DISPENSER If necessary, clean the detergent dispenser. Pull it out from its casing completely by pressing the flap. 1 Wash it under running water using a brush, and dry it. Remove any leftover dried detergent from the bottom of the casing. 2 If required, remove and clean the plug cap.
CLEANING THE DISPENSER HOUSING, INLET HOSE SCREEN AND DOOR RUBBER GASKET 1 Clean the water inlet hose screen frequently under running water. 2 Clean the entire rinsing area of the washing machine with a brush, especially the nozzles on the upper side of the rinsing chamber. 3 392477 After each wash wipe the door rubber gasket. This will prolong its useful life.
CLEANING THE FILTER During cleaning, some water may leak. Therefore, we recommend spreading an absorbent cloth on the floor before starting. 1 Open the filter lid using flat screwdriver or similar tool. 2 Remove the water outlet funnel before cleaning the filter. 3 Gradually rotate the filter in the counter-clockwise direction. Pull out the filter (and let the water slowly drain). 4 Clean the filter under running water.
CLEANING THE WASHING MACHINE The casing should be cleaned with soft cloth and mild detergent.
INERRUPTING AND CHANCHING THE PROGRAM Manual (physical) termination The program can be cancelled / terminated by rotating the program selector dial (1) to the position. “0FF” position. If there is water in the machine, select the additional program (spin (+ ) key (4)). Personal settings You can change the original settings of each program. Once you select a washing program and additional functions, you may save (store) such combination by pressing the START/PAUSE key and keep it pressed for 8 seconds.
Opening the door in case of a power outage In models with an electromagnetic door lock, the door can only be opened by simultaneously pulling the special lever (located at the filter) and the door handle. Opening the door (Temporary interruption/ Permanent suspension change of program) Washing machine door may only be opened if the water level is sufficiently low. If it is not, the water must first be pumped out of the machine. Use the additional water pumping or spinning program).
WHAT TO DO ...? The washing machine shall automatically control the operation of particular functions during the washing cycle. If any irregularity is identified, this will be indicated by reporting (Ex) on the display. The machine will signal the fault until it is turned off. If the fault is on the heating system, the machine will complete the washing program, but without heating the water. Various interferences from the environment (e.g. electric devices) may also cause the machine to signal faults.
TROUBLESHOOTING TABLE Failure Possible cause What to do...? The machine does not work – the display is not lit. • Machine is not powered. Check if: • power in the socket, • the fuse is OK, • plug is in the socket. Water is leaking from the • Filter is not tightly screwed machine. in. • Inlet pipe is not tightly screwed to the machine or to the water faucet. • Outlet pipe fell to the floor. • Tighten the filter properly. • Tighten the inlet pipe. • Affix the outlet pipe to the drain.
Failure Possible cause What to do...? Washing time is longer than usual. Time indicated on the display is corrected during the washing cycle. • Low temperature of inlet water. • The machine switched on the UKS* system because of uneven laundry load. • Low mains voltage. • There has been a failure in the power supply. • Washing program time may be up to 60% longer; however, this does not imply a fault in the machine.
RECOMMENDATIONS FOR WASHING AND ECONOMIC USE YOUR WASHING MACHINE Wash new coloured garments separately the first time. Wash heavily soiled laundry in smaller amounts, with more detergent or a prewash cycle. Treat stubborn stains with a special stain removal agent before the wash. We recommend using the "Grandma's advice for natural stain removal". With slightly soiled laundry, we recommend a program without prewash, use of shorter programs (e.g. Time Care) and a lower washing temperature.
Hardness scale Degree of hardness °dH (°N) m mol/l °fH(°F) p.p.m. 1 - soft < 8,4 < 1,5 < 15 < 150 2 - medium 8,4 - 14 1,5 - 2,5 15 - 25 150 - 250 3 - hard > 14 > 2,5 > 25 > 250 In case of hard water add detergent according to the Chart for degree 1 and add appropriate quantity of water softener (see manufacturer’s instructions). Washing machine is equipped with the dispenser left gate, so you may pour liquid detergent also into the central compartment (depending on model).
GRANDMA'S ADVICE FOR NATURAL STAIN REMOVAL Before using special-purpose stain removers, try using the natural methods that do not harm the environment on less stubborn stains.
Stain Stain removal Glue soak in spirit/denatured alcohol (or a mixture of vinegar and water); rinse Make-up use a glass cleaner and a paper towel Butter rinse with hot soapsuds (if the fabric permits); Fat tablecloth – sprinkle with baking soda, brush after a while wool – remove with mineral water use a mixture of baking soda + water (or toothpaste); dry; scrape off fresh stain - sprinkle with potato starch, then brush milk – rinse first with cold and then with hot water Burnt parts moisten the
DISPOSAL Our appliances are packed in environmentally friendly materials which may be recycled, deposited or decomposed without any threat to the environment. To this end all wrappings are marked accordingly. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Duration [min.] WaterConsumption [L] Powerconsumption [kWh] 0,95 / 0,82** Spinning [rpm] 57 Temp. [°C] 181 / 168** Cotton Max.
Spinning [rpm] Duration [min.] WaterConsumption [L] (A-30%) ECO* 7 / 3,5** 60 800-1400 62-53 181 / 160** 49 0,79 / 0,64** (A-30%) ECO* 7 / 3,5** 40 800-1400 62-53 160 / 148** 49 0,55 / 0,48** Cotton Powerconsumption [kWh] Temp. [°C] Remaining moisture content [%] Max.
PS10 CLASS OEM en (08-15)