Operation Manual

392477

If a power failure occurs when the drum is still full of water, be

careful not to open the door before you pump the water out.

(see Programs/partial programs: Spinning/pumping).

Opening the door in case of a power

outage

In models with an electromagnetic door

lock, the door can only be opened by

simultaneously pulling the special lever

(located at the filter) and the door handle.

Opening the door (Temporary

interruption/ Permanent suspension -

change of program)

Washing machine door may only be opened

if the water level is sufficiently low. If it is

not, the water must first be pumped out

of the machine. Use the additional water

pumping or spinning program).