Operation Manual

30
392477
After disconnecting the appliance from the power mains, all
settings will be reset to their default factory values, except for
the acoustic signal loudness and child lock setting.
ACOUSTIC SIGNAL
Select the acoustic signal loudness by simultaneously pressing the
(6c) key and rotating the program selector dial (1) clockwise to the
initial position.
Each time a key is pressed, the final loudness level is changed
(three levels; press the 6a key to increase the setting and 6c to
decrease it.). Confirm the selection by pressing the (6b) key.
Selected loudness (sound volume) level is indicated on the display
unit. The most recent setting is stored.
OPTIMIZING PROGRAM DURATION
Using advanced technology, the appliance perceives the amount of
laundry in the early stage of the wash.
After detecting the amount of the load, the appliance automatically
adjusts the program duration.
STANDBY MODE
If no program is selected and started and no other action is taken
within five minutes after turning on the machine, the display will be
automatically turned off to save energy. Signal light on the START/
PAUSE key will flash. Signal lamps of additional functions (6a, 6b, 6c)
flash intermittently.
The display will turn on again when you rotate the program selector
dial or press any button. If no action is taken after the end of the
program, the display will also be turned off after five minutes. Signal
light on the START/PAUSE key will flash. Signal lamps of additional
functions (6a, 6b, 6c) flash intermittently.
P o = weighted power in ‘off mode’ [W] 0,07
P I = weighted power in the ‘left on mode’ [W] 1,00
T I = time in ‘left on mode’ [min] 10,0
Low water temperature, low mains voltage and different
washing load may affect the washing time; the remaining time
displayed is adjusted accordingly during the washing process.