Instructions for Use Washing machine
Thank you for your confidence in purchasing our washing machine, and congratulations on the excellent choice. Your new washing machine meets the requirements of modern treatment of laundry. It is rational in the consumption of energy, water and washing agents. Our appliances are friendly to the environment. Some of the materials may be recycled, others deposited or decomposed. To avoid pollution of environment, once your appliance is no longer useful, take it to your local authorized waste appliance dealer.
Description of washing machine Technical information (depending on model) 5. Adjustable legs 6. Water outlet hose 7. Water inlet hose 8. Mains power cable Dimensions (w x d x h): 600 mm x 600 mm x 850 mm Dimensions (w x d x h): 600 mm x 440 mm x 850 mm Depth with door open: 105 cm / 88 cm (depending on model) Weight (net): 72 kg / 61 kg (depending on model) Nominal voltage: 230 V, 50 Hz Rated power: 2000 W Max.
Cautions • Be sure to remove transport brackets prior first use of the appliance. Attempted operation of the blocked machine may result in irreparable damage which is not covered by the manufacturer’s warranty! • When connecting your washing machine to water supply, be sure to use brand new water inlet hose and appropriate sealing gaskets (attached). • Do not locate the machine in a room with temperature below 0°C. Parts of the machine may be damaged if frozen.
Installation and connection Package removal In removing the wrapping be careful not to damage the appliance with a sharp object. Before connecting the appliance, let it warm up to room temperature (wait for two hours). • Our appliances are packed in environmentally friendly materials which may be recycled, deposited or decomposed without any threat to the environment. • To this end all wrappings are marked accordingly. Removal of transport brackets • Move the pipes.
• If you have a tumble dryer of the same dimensions, you can place it on top of the washing machine. Water inlet connection To ensure correct operation of the appliance, water pressure inlet must be between 0,05 and 0,8 MPa. Minimum water pressure can be established by measuring the quantity of poured out water. 3 litres of water must be poured out from completely opened tap in 15 seconds.
Do not immerse the Aqua-stop system inlet pipe into the water, because it contains the electric valve! Water outlet connection • Fix the outlet hose to run into the sink or the bathtub, or connect it directly to the wall drain outlet (diameter min. 4 cm). • Wall drain must be installed properly and must enable occasional cleaning. • Fasten the outlet hose support with a piece of rope led through the hose elbow, to prevent the hose from slipping to the floor.
Operation A - program selector B - decreasing the spinning rpm or turning the spinning cycle off C - short program knob D - elevated water level knob E - START/PAUSE knob Program selector Basic programs Partial programs Cotton Pre-wash Cotton E Rinse Synthetics Easy iron Softening Delicate Pumping water Wool Spinning Mix 196328 8 Signal LED’s: - washing program stages • wash + pre-wash • rinse • spin
Washing procedure • • • • • • • Open the door of the machine. Load the laundry into the drum. Close the door. Open the water inlet faucet. Push the ON/OFF button and select the program. Add washing and treatment agents (detergent and softener). Start the operation by pushing the START knob (E). - Open the door of the machine. Door is opened by pulling the handle (lever) on the right hand side of the door towards you. - Sort the laundry by the type of fabrics.
To wash heavily soiled laundry that will not discolor, use the program with a prewash . If you wish to economize with energy, use the economic program E 40°C instead of the 60°C program. Synthetics Normally stained shirts, blouses and other polyester and polyamide garments, or a mixture of these fabrics with cotton. If you wish the laundry not to be excessively creased at the end of washing, use easy ironing program . Delicate This is a program for delicate fabrics (dresses, skirts, blouses) and curtains.
Basic programs Spin speed - RPM max. reduced 1400/1300 1200/1100 1000/900/800 700 600 500 1000/800 600 Delicate 700 0 Wool 600 0 Cotton Synthetics , Mix Spin OFF (RPM max. 700 RPM). This knob switches off spin on all programs. Short program • energy-saving program • appropriate for washing lightly soiled laundry or smaller quantities of clothes • reduces washing and rinsing time • reduces water consumption (with some programs).
wish to pump the water out of the machine, without spinning. Spinning Aggressive spinning for non-delicate laundry at high spin RMP. You may engage the reduced spin RPM knob. Spinning speed (rounds per minute) can be decreased by pressing the lower spinning speed key ( ).
- End of operation Flashing LED’s for particular washing stages indicate that the program was completed. • Washing machine door can be opened. • Extract the laundry from the drum and remove any alien objects from the door gasket. • Leave the door ajar to allow the interior to dry. • Close the water inlet faucet. • Switch the machine off by turning the program selector to position “0”. • Pull the power lead from the socket and cut the power supply from the mains.
Tips for washing and energy saving • Before washing sort out the laundry according to the type, degree of dirtiness and color resistance. • Prior selecting the washing program consult the sewn tab with information on a particular piece of laundry (see Maintenance Chart on the last page). • Wash separately the new colored textile products for the first time. • Wash heavily soiled laundry in small quantities and add more detergent. • Treat stubborn stains with special stain remover, it will save energy.
• Insert particularly delicate linen (stockings, delicate female underwear, etc.) into the special bag. • High spin RPM leave less moisture in laundry which dries out much quicker in the tumble dryer, thereby saving energy. Do not put clods of detergent into the soap dispenser as the tube in the washing machine may clog. Cleaning and maintenance Disconnect the washing machine from the mains before cleaning! • The casing should be cleaned with soft cloth and mild detergent.
• Wash it under running water using a brush, and dry it. Remove any leftover dried detergent from the bottom of the casing. • Clean the entire rinsing area of the washing machine with a brush, especially the nozzles on the upper side of the rinsing chamber. • Clean frequently the water inlet hose screen under running water. • After each wash wipe the door rubber gasket. This will prolong its useful life. • Open the filter lid using flat screwdriver or similar tool.
• Carefully turn the filter insert in anticlockwise direction and let the water slowly drain; then remove the filter and clean it under running water. • Insert the filter back as shown on the picture, and tighten by turning it in clockwise direction. To ensure good sealing the gasket surface (A) must be dirt free. Failures The washing machine automatically monitors the execution of particular functions during the operation, and reports any detected failures.
Interferences from the ambient (for example electrical wiring) could induce signalization of different faults. In such cases: - switch the appliance off, and wait for a few seconds; - switch the appliance back on and repeat the washing program. If the fault repeats, call authorized service shop. Warranty shall not apply in case of failures due to interferences from the environment (lightning stroke, power supply circuit faults, natural disasters).
Laundry is not properly spun. No failure is reported. Greasy wads appear on the laundry. Possible cause Remedy Water outlet is clogged Check if: • the filter is clean, • outlet pipe is not jammed, • the drain is clogged, • outlet pipe is positioned higher than 1m. Push START again The machine operates normally. Wash large and small pieces of laundry together. The machine switched on the UKS* function. Because of bad laundry balance, the machine has automatically reduced spin RPM.
Failure FAILURE 1 Program temperature not reached (the machine reports a failure - the LEDs periodically flash once) Possible cause Remedy Temperature sensor • Turn off the appliance and wait for disconnected from the electronic a few seconds; circuit. • turn the appliance back on and repeat the washing program. If the failure is reported again, call a service technician.
Tables RPM RPM 600 - 1400 Energy cons. [kWh] 800 - 1400 Water cons. [L] 600 Duration [min.] Temp. [°C] Max. load [kg] Basic programs Spin max..
800 - 1400 600 - 1400 RPM 600 RPM Duration [min.] Energy cons. [kWh] Temp. [°C] Water cons. [L] Max. load [kg] Basic programs Spin max..
RPM 800 - 1400 800 - 1400 RPM Duration [min.] Energy cons. [kWh] Temp. [°C] Water cons. [L] Max. load [kg] Basic programs Spin max..
Program chart/Additional functions Reduced spin RPM Short program Higher water level Program Cotton Cotton with prewash Synthetics Delicate Wool Mix Basic programs Partial programs Rinse Softening Pumping water Spinning possibility 196328 24
Maintenance chart Max. washing temp. 95°C Delicate wash Whitening Max. washing temp. 40°C Max. washing temp. 60°C Whitening in cold water Max. washing temp. 30°C Manual washing Washing not allowed Whitening not allowed Ironing Hot iron max. 200°C Hot iron max. 150°C Hot iron max.
196328 26
PS PG0A OEM en (08-11)