Operation Manual

141373

during the operation, prior last rinse. Indicator LED above the

washing cycle symbol is lit.

• The program stops at the end of last rinse, prior spinning:

laundry remains soaked in water and prevents crease, if you

are unable to remove it from the drum immediately after the end

of washing cycle.

• Indicator LED above the knob is ﬂ ashing.

• The selected program is completed by pushing the START

button (F), but you may also apply partial programs (pumping

or spinning), but you must ﬁ rst return the program selector (A)

to the “0” position for at least one second, prior selecting any of

the partial programs.

• When program continues, indicator LED above the knob goes

off.

Higher water level (Water plus)

• For better rinse, which is important for extra sensitive skin to

detergents.

• For washing heavily stained laundry.

Half-program

• Used for washing smaller quantities of laundry.

• Reduced consumption of detergents and water, and shortens

washing time.

Short program

• Convenient for washing less stained laundry.

• Washing time is reduced (see Program chart).

Reduced spin RPM

• Reduction of spin RPM depends on program selection and

maximum RPM for particular type of machine.

Basic programs Spin speed - RPM

max. reduced

Cotton 1400/1300

1200/1100

1000/900/800

700

600

500

Synthetics , Mix 1000/900/800 600

Delicate 700 0

Wool 600 0

Manual wash 400 0

Spin OFF (RPM - 700 RPM).

This knob switches off spin on all programs.