Instructions / Assembly

STEP 1
To make assembly easier, slide outer
section down one rung or remove the
outer section on one side from the
inner rail assembly.
Remove both bolts and hardware from
the foot.
STEP 2
Insert the wheel kit. Pay close attention
to the orientation of the wheel.
3
3
Correct
NOTE: PAY CLOSE ATTENTION TO
THE CORRECT POSITION OF THE
FOOT BEFORE REMOVING ALL
HARDWARE
PASO 1
Para facilitar el ensamblaje, desliza la
sección exterior un peldaño hacia
abajo o retirar dicha sección a un lado
del ensamblaje del riel interior.
Quita los pernos y accesorios
de la pata.
PASO 2
Inserta el kit de ruedas. Presta mucha
atención a la orientación de las ruedas.
Correcto
NOTA: PRESTA MUCHA ATENCIÓN A
LA POSICIÓN CORRECTA DE LA
PATA ANTES DE QUITAR TODOS
LOS ACCESORIOS.