User Manual

STEP 17: LADDER TO FORT

1: PLACE THE LADDER INTO POSITION ON THE FORT AS SHOWN BELOW. USING THE LADDER BRACKETS AS A

TEMPLATE, DRILL A 3/8” HOLE THROUGH THE BOTTOM PANEL BOARD.

2: FROM THE UNDERSIDE OF THE DECK INSERT A T-NUT INTO THE BACKSIDE OF THE 3/8” HOLES ON THE BOTTOM

PANEL BOARD.

3: ATTACH THE LADDER WITH 5/16 X 1-1/2” HEX BOLTS AND 5/16” WASHERS.

4: WHEN THE BRACKETS ARE SECURE, AND THE LADDER IS IN ITS FINAL POSITION; TIGHTEN THE 5/16 X 1-1/2” BOLTS

ON THE LADDER SIDES.

INSERT A

T-NUT BEHIND

THE 2 X 6 ON

BOTH SIDES.

3/4"

5/16" X 1-1/2"

HEX BOLT

5/16" WASHER