Instructions / Assembly

Common Installation Practice Installing T-nuts

When installing T-nuts into the wood, use a smooth faced hammer to set the face of the

T-nut ush into the wood

Insert the barrel of the T-nut into the

predrilled hole. Using a smooth faced

hammer, drive the T-nut until the face

of the T-nut is ush to the wood.

This picture shows the T-nut inserted

and installed ush to the wood.

This picture shows an end view of the T-nut

installed ush to the wood.

WARNING: DO NOT EMBED THE TOP

OF THE T-NUT INTO THE

FACE OF THE WOOD

Cross Section end view, you are looking at an X-ray view

of the post and T-nut. The barrel of the T-nut is in the

corner post the line is the face of the wood.

Corner Post

T-nut

Flush (Correct)