Instructions / Assembly

STEP 15: ATTACHING THE ROCK WALL
1: PLACE THE ROCK WALL INTO POSITION ON THE RIGHT SIDE OF THE FORT AS SHOWN BELOW. USING THE 90
GREEN BRACKETS AS A TEMPLATE; DRILL A 3/8” HOLE THROUGH THE BOTTOM PANEL BOARD.
2: GO UNDERNEATH THE DECK TO INSERT A T-NUT INTO THE BACKSIDE OF THE 3/8” HOLES IN THE BOTTOM PANEL
BOARD.
3: ATTACH THE ROCK WALL WITH 5/16 X 1-1/2” BOLTS AND 5/16” WASHERS.
4: WHEN THE BRACKETS ARE SECURE, AND THE ROCK WALL IS IN ITS FINAL POSITION; TIGHTEN THE 5/16 X 1-1/2”
BOLTS ON THE ROCK WALL SIDES.
5/16 X 1-1/2”
5/16" WASHER
HEX BOLTS
INSERT T-NUT BEHIND THE
2 X 6 ON BOTH SIDES.
RIGHT SIDE OF FORT
50