Instructions / Assembly

STEP 32: ROOF

1: PLACE THE 1 X 6 X 47-1/2" ROOF BOARDS ON TOP OF THE ROOF SUPPORTS, FITTING THE TONGUE END INTO THE

GROOVE END OF THE ROOF STARTERS. EACH SIDE OF THE ROOF GETS NINE ROOF BOARDS.

2: FASTEN THE ROOF BOARDS TO THE ROOF SUPPORTS WITH 1-1/2" WOOD SCREWS.

3: PLACE A 1 X 4 X 47-1/2" ROOF FINISHER ON EACH END OF THE ROOF, AND FASTEN WITH 1-1/2" WOOD

SCREWS.

4: USE THE INSTRUCTIONS PROVIDED WITH THE DORMERS AND CHIMNEY TO BUILD THEM. INSTALL THREE ROOF

BOARDS AND THEN INSTALL THE CHIMNEY ACCORDING TO THE CHIMNEY INSTRUCTIONS. AFTER INSTALLING THE

SEVENTH ROOF BOARD INSTALL THE DORMER ACCORDING TO THE DORMER DIRECTIONS. THEN FINISH

INSTALLING THE REMAINING ROOF BOARDS AND ROOF FINISHER. ALSO NOTE THAT THERE IS ONE DORMER ON

EACH SIDE OF THE ROOF.

1-1/2" WOOD

SCREW

SCALE 1 : 12

DETAIL C

CHIMNEY

(SEVENTH ONE)

SIDE OF ROOF)

(ONE ON EACH

DORMER

(FIRST ONE)

ROOF BOARD

1 X 6 X 47-1/2"

(THIRD ONE)

ROOF BOARD

1 X 6 X 47-1/2"

1 X 4 X 47-1/2"

ROOF FINISHER