Instructions / Assembly

RIGHT SIDE
2
X
6
TOWER
OF TOWER
FRONT OF
2" WOOD SCREW.
LEFT
SIDE
OF
TOWER
2
X
6
C
D
B
A
FRONT SIDE SLATS
1: FIND NINE 5/4 X 3 X 28-1/2" PANEL SLATS.
2: IF THE SLATS ARE NOT ALREADY PRE-DRILLED THEN PRE-DRILL THE PANEL SLATS 1" FROM EACH END ON CENTER
WITH A 1/8" DRILL BIT. (SEE TOP LEFT PICTURE BELOW)
3: ON THE LEFT SIDE OF THE TOWER INSTALL THE FIRST PANEL SLAT 2-5/8" FROM THE CORNER POST. THEN INSTALL
THE REMAINING FOUR PANEL SLATS 2-7/8" APART AS SHOWN IN THE PICTURE AT THE MIDDLE LEFT BELOW. ATTACH
THE PANEL SLATS WITH 2" WOOD SCREWS.
4: ON THE FRONT SIDE OF THE TOWER INSTALL THE PANEL SLATS AS SHOWN IN THE PICTURE AT THE BOTTOM LEFT
BELOW. ATTACH THE PANEL SLATS WITH 2" WOOD SCREWS.
STEP 12: PANEL SLATS
2 X 6
LEFT SIDE SLATS
2 X 6
5/4 X 3 X 28-1/2"
PANEL SLAT
16
5 5
"1
1"
16
"
1"
1
2X
1
8
"
6
"
8
1
3
4
"
1
2
3
"
1
"
17
1
4
6
1
8
"
" 2
5
8
2
7
8
" BETWEEN SLATS
113