Instructions / Assembly

90
HEX BOLT
5/16 X 1-1/2"
GREEN BRACKET
T-NUT
5/16" WASHER
PLACE ONE 2-1/2" WOOD
SCREW IN EACH END OF
THE FLOOR SUPPORT
BOARDS.
2 X 2 X 16"
FLOOR SUPPORT BOARD
STEP 18: CLIMBING RAMP
1: ATTACH THE 2 X 2 X 16" FLOOR SUPPORT BOARDS TO THE FLOOR BOARDS WITH 2-1/2" WOOD SCREWS. (SEE
DETAIL VIEW BELOW)
2: PLACE T-NUTS ON THE INSIDE OF THE HOLES IN THE RAMP SIDE BOARDS. SET THE T-NUTS WITH A HAMMER
FLUSH/NEAR FLUSH WITH THE RAMP SIDES.
3: FASTEN THE 90
GREEN BRACKET TO THE RAMP SIDES WITH 5/16 X 1-1/2" HEX BOLTS AND 5/16" WASHERS.
59