Instructions / Assembly

5/16" T-NUT

CORNER POST

4 X 4 X 40-1/2"

EACH OTHER.

SHOULD FACE

COUNTERBORES

CORNER POST FRONT

CORNER POST REAR

BOTH SIDES.

THIS HOLE ON

PLUG AND FILL

BLACK PLASTIC

SILICONE ON A

DAB OF CLEAR

HERE THEN PUT A

HAS A HOLE

IF YOUR POST

HAS A HOLE

HERE THEN PUT A

DAB OF CLEAR

SILICONE ON A

BLACK PLASTIC

PLUG AND FILL

THIS HOLE ON

BOTH SIDES.

STEP 9: INSTALLING T-NUTS ON CORNER POSTS

1: FIND FOUR 4 X 4 X 40-1/2" CORNER POSTS.

2: USING THE DIAGRAM BELOW, INSTALL T-NUTS INTO THE APPROPRIATE HOLES. PLACE T-NUTS INTO THE HOLES OF

THE CORNER POST AND SET WITH A HAMMER.

3: THE CORNER POSTS ARE SHOWN RELEVANT TO THEIR ORIENTATION ON THE UNIT.