Instructions / Assembly

STEP 22: LAG POSTS

1: TWO 4 X 4 X 60-1/4" LAG POSTS WILL BE USED TO EXTEND THE MIDDLE CORNER POSTS TO

ACCEPT THE UPPER LEVEL ROOF.

2: REST THE BOTTOM OF EACH LAG POST ON TOP OF THE 2 X 6 X 70 BACK PANEL BOARD.

3: CENTER EACH LAG POST DIRECTLY OVER THE CENTER OF THE MIDDLE CORNER POSTS.

4: ATTACH EACH LAG POST TO THE MIDDLE CORNER POST WITH 3/8" X 5" LAG SCREWS AND

3/8" WASHERS.

5: HAMMER T-NUTS INTO THE HOLES SHOWN BELOW.

3/8" WASHER

2 X 6 X 70"

BACK PANEL BOARD

T-NUT

4 X 4 X 60-1/4"

LAG SCREWS

LAG POST - RIGHT

3/8 X 5"

4 X 4 X 60-1/4"

LAG POST - LEFT