Instructions / Assembly

ANGLE SUPPORT

UPPER LEVEL

RAD RIDE SIDE

2 X 4 X 18"

SWING SIDE

2 X 4 X 21-1/2"

ANGLE SUPPORT

UPPER LEVEL

REAR OF FORT

REAR

2-1/2" WOOD SCREW

DETAIL B

UPPER LEVEL

ANGLE SUPPORT

#8 X 3" WOOD SCREW

CORNER POST

SWING SIDE

#8 X 2" WOOD SCREW

2 X 4 X 21-1/2"

2 X 4 X 34"

UPPER LEVEL

DECK SUPPORT

TO THE RIGHT REAR CORNER POST WITH ONE #8 X 2" WOOD SCREW AND ONE #8 X 3" WOOD SCREW.

STEP 28: UPPER LEVEL ANGLE SUPPORTS

1: (SEE DETAIL A) PLACE THE 2 X 4 X 18" ANGLE SUPPORT UPPER LEVEL RAD RIDE SIDE UNDER THE 4 X 4 X

23- 1/2" SLIDE BLOCK ON THE LEFT SIDE OF THE FORT. THE ANGLE SUPPORT SHOULD BE FLUSH TO THE LEFT

SIDE OF THE LEFT REAR CORNER POST. ATTACH THE ANGLE SUPPORT AT THE TOP AND AT THE BOTTOM

WITH ONE #8 X 2" WOOD SCREW AND ONE #8 X 3" WOOD SCREW.

2: (SEE DETAIL B) PLACE THE 2 X 4 X 21-1/2" ANGLE SUPPORT UPPER LEVEL SWING SIDE AGAINST THE 2 X 4

X 34" UPPER LEVEL DECK SUPPORT ON THE RIGHT SIDE OF THE FORT. THE TOP OF THE ANGLE SUPPORT

SHOULD BE FLUSH TO THE TOP OF THE DECK SUPPORT. FASTEN THE TOP OF THE ANGLE SUPPORT TO THE

DECK SUPPORT WITH FOUR #8 X 2-1/2" WOOD SCREWS. FASTEN THE BOTTOM OF THE ANGLE SUPPORT

DETAIL A

4 X 4 X 23-1/2"

SLIDE BLOCK

RAD RIDE SIDE

UPPER LEVEL

#8 X 2" WOOD SCREW

#8 X 3" WOOD SCREW

#8 X 2" WOOD

SCREW

#8 X 3" WOOD

2 X 4 X 18"

ANGLE SUPPORT

REAR

CORNER POST