Instructions / Assembly

STEP 42: CENTER TARP SUPPORT

1: HAMMER A T-NUT INTO THE HOLE OF A 2 X 4 X 71-7/8" CENTER TARP SUPORT.

2: PLACE THE CENTER TARP SUPPORT ON THE INSIDE OF THE 2 X 6 X 102" ROPE LADDER SUPPORT AT THE

FRONT OF THE PLAYSET. LINE UP THE HOLE IN THE CENTER TARP SUPPORT WITH THE HOLE IN THE ROPE

LADDER SUPPORT.

3: FASTEN THE CENTER TARP SUPPORT TO THE ROPE LADDER SUPPORT WITH A 5/16" X 2-1/2" HEX BOLT

AND A 5/16" WASHER AT THE TOP.

4: SQUARE THE CENTER TARP SUPPORT TO THE DECK AND SECURE THE BOTTOM OF THE CENTER TARP

SUPPORT TO THE FRONT FACE BOARD WITH #8 X 2-1/2" WOOD SCREWS.

FRONT OF FORT

HEX BOLT

2 X 4 X 71-7/8"

CENTER TARP SUPPORT

DETAIL A

#8 X 2-1/2" WOOD SCREW

ROPE LADDER SUPPORT

T-NUT

2 X 6 X 102"

5/16" WASHER

5/16 X 2-1/2"

2 X 6 X 70"

FRONT FACE BOARD