Instructions / Assembly

CENTER LAG POST
LAG SCREW
3/8" WASHER
4 X 4 X 69-3/4"
3/8 X 5"
DETAIL B
4 X 4 X 71-7/8"
REAR CENTER POST
LOWER LEVEL
CENTER LAG POST
B
4 X 4 X 69-3/4"
2 X 4 X 69-5/8"
REAR CENTER POST
UPPER LEVEL
A
2 X 4 X 70"
UPPER LEVEL STEP/
RAILING
STEP 43: REAR CENTER POST/CENTER LAG POST
1: HAMMER A T-NUT INTO THE HOLE OF A 2 X 4 X 69-5/8" REAR CENTER POST UPPER LEVEL REAR.
2: PLACE THE CENTER POST INSIDE THE RAILING AT THE REAR OF THE PLAYSET. LINE UP THE HOLE IN THE CENTER
POSTS WITH THE HOLE IN THE RAILING.
3: FASTEN THE CENTER POST UPPER LEVEL TO THE RAILING WITH A 5/16" X 2-1/2" HEX BOLT AND A 5/16" WASHER AT
THE TOP.
4: SQUARE THE CENTER POST UPPER LEVEL TO THE DECK AND SECURE THE BOTTOM OF THE CENTER
POST UPPER LEVEL TO THE REAR BOTTOM PANEL BOARD WITH #8 X 2-1/2" WOOD SCREWS. SEE DETAIL A.
5: SQUARE THE 4 X 4 X 69-3/4" CENTER LAG POST TO THE DECK SPACER. ATTACH IT TO THE REAR CENTER POST
LOWER LEVEL USING 3/8 X 5" LAG SCREWS AND 3/8" WASHERS. SEE DETAIL B.
RAILING
2-1/2" WOOD
REAR CENTER
HEX BOLT
DETAIL A
2 X 4 X 70"
T-NUT
UPPER LEVEL STEP/
SCREW
5/16" WASHER
5/16 X 2-1/2"
UPPER LEVEL
POST
2 X 4 X 69-5/8"
2 X 6 X 42-1/2"
REAR BOTTOM
PANEL BOARD
83