Instructions / Assembly

UPPER LEVEL

RAD RIDE SIDE

#8 X 2" WOOD

SCREW

#8 X 3" WOOD

#8 X 2" WOOD SCREW

#8 X 3" WOOD SCREW

SCREW

2 X 4 X 18"

ANGLE SUPPORT

4 X 4 X 23-1/2"

SLIDE BLOCK

REAR

CORNER POST

2 X 4 X 18"

SWING SIDE

RAD RIDE SIDE

UPPER LEVEL

ANGLE SUPPORT

2 X 4 X 21-1/2"

ANGLE SUPPORT

UPPER LEVEL

REAR OF FORT

STEP 28: UPPER LEVEL ANGLE SUPPORTS

1: (SEE DETAIL A) PLACE THE 2 X 4 X 18" ANGLE SUPPORT UPPER LEVEL RAD RIDE SIDE UNDER THE 4 X 4 X

23- 1/2" SLIDE BLOCK ON THE LEFT SIDE OF THE FORT. THE ANGLE SUPPORT SHOULD BE FLUSH TO THE LEFT

SIDE OF THE LEFT REAR CORNER POST. ATTACH THE ANGLE SUPPORT AT THE TOP AND AT THE BOTTOM

WITH ONE #8 X 2" WOOD SCREW AND ONE #8 X 3" WOOD SCREW.

2: (SEE DETAIL B) PLACE THE 2 X 4 X 21-1/2" ANGLE SUPPORT UPPER LEVEL SWING SIDE AGAINST THE 2 X 4

X 34" UPPER LEVEL DECK SUPPORT ON THE RIGHT SIDE OF THE FORT. THE TOP OF THE ANGLE SUPPORT

SHOULD BE FLUSH TO THE TOP OF THE DECK SUPPORT. FASTEN THE TOP OF THE ANGLE SUPPORT TO THE

DECK SUPPORT WITH FOUR #8 X 2-1/2" WOOD SCREWS. FASTEN THE BOTTOM OF THE ANGLE SUPPORT

TO THE RIGHT REAR CORNER POST WITH ONE #8 X 2" WOOD SCREW AND ONE #8 X 3" WOOD SCREW.

DETAIL A

SWING SIDE

#8 X 2" WOOD SCREW

DETAIL B

CORNER POST

2-1/2" WOOD SCREW

REAR

#8 X 3" WOOD SCREW

ANGLE SUPPORT

UPPER LEVEL

2 X 4 X 21-1/2"

2 X 4 X 34"

UPPER LEVEL

DECK SUPPORT