Instructions / Assembly

swing beam extending off the right side.

posts should face. Note: the Slide side is considered the front of the playset with the

STEP 1: CORNER POST LAYOUT

1: This step is critical to building the fort properly. If any mistakes are made here, you

will need to dis-assemble and then re-assemble to make your corrections.

2: Lay out each of the 4 x 4 x 96” Corner Posts in the area you intend on building the

fort side of the playset.

3: Use the diagram below to correctly identify and orient the necessary direction the

CORNER POST #2

(REAR - LEFT)

CORNER POST #3

(REAR - RIGHT)

CORNER POST #1

(FRONT - LEFT)

CORNER POST #4

(FRONT - RIGHT)

4 X 4 X 96"

CORNER POST

FRONT OF PLAY SET

(SLIDE SIDE)

HOLES AT THIS

LOCATION

RIGHT CORNER POSTS

WILL HAVE EXTRA