Instructions / Assembly

CORNER POST #3

(REAR - RIGHT)

(FRONT - LEFT)

CORNER POST #1

(FRONT - RIGHT)

CORNER POST #4

CORNER POST #2

(REAR - LEFT)

5/16" X 4-1/2"

HEX BOLT

2 X 4 X 47-3/8"

PANEL SUPPORT

(OFFSET HOLES UP)

5/16" X 4-1/2"

HEX BOLT

5/16" WASHER

2 X 6 X 47-3/8"

END SANDBOX BOARD

(OFFSET HOLES UP)

5/16" WASHER

STEP 5: SANDBOX BOARDS AND PANEL SUPPORT

1: The 2 x 4 x 47-3/8” Panel Supports (offset holes up) attach to the sides of the front and rear

corner posts with two 5/16” x 4-1/2” hex bolts and two 5/16” washers.

2: Attach the top holes in the 2 x 6 x 47-3/8” End Sandbox Boards (offset holes up) to the sides

of the front and rear corner posts with two 5/16” x 4-1/2” hex bolts and two 5/16” washers.

The structure should be able to stand on its own, without any support, at this stage.