Instructions / Assembly

2 X 4 X 17"

LADDER STEP

GREEN BRACKET

5/16" T-NUT

HEX BOLT

2" WOOD SCREW

5/4 X 4 X 18-1/2"

LADDER BACK

5/4 X 4 X 57"

LADDER SIDE

5/16" X 1-1/2"

5/16" WASHER

STEP 12: LADDER ASSEMBLY

1: Lay one 2 x 4 x 57” Ladder Side on a flat surface with channels facing down. Place the

barrel of a T-Nut in the hole at the top of the Ladder Side, and secure with a hammer.

Repeat this step for the other Ladder Side.

2: Flip the Ladder Side over so that the channels are facing up.

3: Place the Ladder Steps into the channels, and then place the second Ladder Side on top,

with the channels facing down.

4: Now place two 2” wood screws in each step.

5: Carefully turn the ladder over and finish the other side with two 2” wood screws per step.

6: Install two 90

green brackets using 5/16” x 1-1/2” bolts and 5/16” washers.

7: Install the 5/4 x 4 x 18 1/2” ladder back above the opening of the top channels with

two 2” wood screw per side.