Instructions / Assembly

5/16" WASHER

5/16" T-NUTS

(PUT IN BACK SIDE

OF HOLE)

5/16" X 1-1/2"

HEX BOLT

3/4"

14 - 7/16"

STEP 13: ATTACHING THE LADDER

1: The Ladder attaches to the rear of the play set, 14-7/16” from the outside edge of the

Rear-Left corner post.

2: Make sure the ladder is level. The bottom edge of the 90 brackets should be 3/4” up from

the bottom edge of the 2 x 4. Mark the position of the bracket holes on the 2 x 4.

3: Drill 3/8” holes where marked.

4: Insert 5/16” T-nuts in the back of the holes.

5: Attach the 90 brackets to the 2 x 4 with two 5/16” x 1-1/2” hex bolts and two 5/16”

washers.