Instructions / Assembly

HEX BOLT
5/16" X 4-1/2"
2 X 4 X 12"
BOTTOM PANEL
BOARD - LEFT
(OFFSET HOLES UP)
2 X 4 X 12"
BOTTOM PANEL
BOARD - RIGHT
(OFFSET HOLES UP)
5/16" WASHER
5/16" WASHER
5/16" X 4-1/2"
HEX BOLT
5/16" WASHER
2 X 4 X 47-3/8"
PANEL SUPPORT
(OFFSET HOLES UP)
2 X 4 X 47-3/8"
PANEL SUPPORT
(OFFSET HOLES UP)
5/16" X 3-1/2"
LAG SCREW
STEP 16: PANEL AND PANEL SUPPORT BOARDS
1: Place the 2 x 4 x 12” Bottom Panel Board - Left and 2 x 4 x 12” Bottom Panel Board - Right
on top of the 2 x 4’s as shown below with offset holes up. Attach each Bottom Panel Board
with one 5/16” x 3-1/2” lag screw and 5/16” washer.
2: Place the 2 x 4 x 47-3/8” Panel Support against the rear of the play set with offset holes up.
Attach the Panel Support with two 5/16” x 4-1/2” hex bolts and 5/16” washers.
3: Place the 2 x 4 x 47-3/8” Panel Support against the front side of the play set with offset
holes up. Attach the Panel Support with two 5/16” x 4-1/2” hex bolts and 5/16” washers.
45