Instructions / Assembly

STEP 17: PANEL BOARDS

1: Place the 2 x 4 x 12” Bottom Panel Board - Left and 2 x 4 x 12” Bottom Panel Board - Right

on top of the 2 x 4 at the left side of the play set as shown below with offset holes down.

Attach each Bottom Panel Board with one 5/16” x 3-1/2” lag screw and one 5/16” washer.

2: Place the 2 x 4 x 47-3/8” Panel Support on top of the 2 x 4 at the right side of the play set

with offset holes down. Attach the Panel Support with two 5/16” x 3-1/2” lag screws and two

5/16” washers.

BOARD - LEFT

BOARD - RIGHT

(OFFSET HOLES DOWN)

PANEL SUPPORT

5/16" WASHER

LAG SCREW

BOTTOM PANEL

(OFFSET HOLES DOWN)

2 X 4 X 47-3/8"

5/16" X 3-1/2"

LAG SCREW

2 X 4 X 12"

BOTTOM PANEL

5/16" X 3-1/2"

5/16" WASHER