Instructions / Assembly

STEP 18: PANEL SLATS

1: Locate fifteen 5/4 x 3 x 28” Panel Slats. Four Panel Slats will be installed at both the left and

rear of the play set. Seven Panel Slats will be installed at the right of the play set.

2: At the right of the play set center one Panel Slat over the center of each deck board.

Square each Panel Slat to the Panel Support. Attach each Panel Slat to the inside of the

Panel Supports with two 2” wood screws for each Panel Slat.

3: At the left and rear of the play set place one Panel Slat flush with the end of the 2 x 4 x 12”

Bottom Panel Board. Square the top of the Panel Slat with the Panel Support or Panel Board.

Attach the Panel Slat to the Panel Board/Panel Support with two 2” wood screws. Center

another Panel Slat between the one you just installed and the corner post. Attach the Panel

Slat with two 2” wood screws.

2" WOOD SCREW

PANEL SUPPORT

(7 PIECES AT RIGHT

PANEL SLAT

PANEL SUPPORT

5/4 X 3 X 28"

2" WOOD SCREW

SIDE)

5/4 X 3 X 28"

PANEL SLAT

(4 PIECES AT LEFT AND

REAR SIDES)