Instructions / Assembly

1. Locate ten 5/4 x 5 x 23-7/8” Rock Wall Boards and one 5/4 x 5 x 23-7/8” Bottom Rock Wall Board

with one big hole in it.

2. Place one Rock Wall Board at the top of the Rock Wall Sides nearest the holes where you

previously installed the tee nuts. Make sure the Rock Wall Board is flush with the ends and sides of

the Rock Wall Side boards.

3. Attach the Rock Wall Board with four 2” wood screws.

4. Now place another Rock Wall Board beneath the one previously installed and attach with four 2”

wood screws. Continue installing Rock Wall Boards to the Rock Wall Sides until they are used up.

5. Attach the Bottom Rock Wall Board with one large hole in it last with four 2” wood screws. The large

hole should be offset up.

STEP 20: ROCK WALL

FLUSH

ROCK WALL SIDES

FLUSH

FLUSH5/4 X 5 X 23-7/8"

ROCK WALL BOARD

(INSTALL THIS ONE FIRST)

2" WOOD SCREW

5/4 X 5 X 23-7/8"

BOTTOM ROCK WALL BOARD

(BIG HOLE IS OFFSET UP)