Instructions / Assembly

3/8" LOCK NUT
3/8" X 6-1/2" CARRIAGE BOLT
TORQUE WASHER
3/8" WASHER
3/8" X 3-1/2" LAG SCREW
BOLT CAP
STEP 30: SWING BEAM TO SWING LEGS
1: Fasten the Swing Beam to the Swing Leg Bracket using 3/8” x 6-1/2” carriage bolts with
torque washers on top of the Swing Beam, and 3/8” lock nuts with 3/8” washers underneath.
2: Predrill an 11/64" hole through the middle hole in the swing leg bracket. Use a 3/8 x 3-1/2”
lag screw and 3/8” washer in the middle hole of the Swing Leg Bracket.
3: Place bolt caps over exposed threads after securing.
59