Instructions / Assembly

STEP 35: ROOF SUPPORTS

1: Attach one 2 x 4 x 35-1/2” Roof Support-Left and one 2 x 4 x 35-1/2” Roof Support-Right to

the left and right of the play set with 5/16” x 4-1/2” hex bolts and 5/16” washers.

Note the counter-sunk holes face out. The roof supports will meet to form a 90 angle at

the peak.

2: Place a 5/4 x 6 x 10-1/2” Roof Peak Support at the peak of the roof supports on the outside.

Attach the roof supports to the Roof Peak Support with four 2” wood screws from the inside.

The Roof Peak Support should be flush to the roof supports on the top surfaces.

ROOF SUPPORT-LEFT

5/4 X 6 X 10-1/2"

ROOF PEAK SUPPORT

5/16" WASHER

2 X 4 X 35-1/2"

ROOF SUPPORT-RIGHT

5/16" X 4-1/2"

HEX BOLT

ROOF PEAK SUPPORT

DETAIL A

5/4 X 6 X 10-1/2"

2" WOOD SCREW

FLUSH ON TOP