Instructions / Assembly

1-1/2" WOOD SCREW

1: Place the 1 x 5 x 52” (groove only) Roof Starter Boards at the peak of the roof. The holes in

the Roof Starters should be centered on the Roof Supports. The flat side of the Roof Starters

should be placed as close together as possible near the peak without the boards

overlapping.

2: Fasten the Roof Starter Boards to the Roof Supports with 1-1/2” wood screws.

3: Place the 3-1/2 x 3-1/2 x 52” Roof Peak on top of the Roof Starter Boards and fasten with

four 1-1/2” wood screws.

STEP 36: ROOF STARTERS/ROOF PEAK

1 X 5 X 52"

ROOF STARTER

ROOF SUPPORTS

3-1/2 X 3-1/2 X 52"

ROOF PEAK