Instructions / Assembly

1: Place a 2 x 4 x 43-3/4” Sun Support underneath the Roof Supports. Make sure the Sun

Support is level. Attach the Sun Support through the pre-drilled holes in the bottom to the

Roof Supports with two 2-1/2” wood screws. Repeat for the other side of the roof.

2: Place a 2 x 6 x 16” Sun centered on top of the Sun Support. The face of the Sun should be

flush with the face of the Sun Support. Fasten the Sun to the Sun Support with two 3” wood

screws. Repeat for the other side of the roof.

STEP 38: SUN SUPPORT AND SUN

2-1/2"

WOOD SCREW

2 X 4 X 43-3/4"

SUN SUPPORT

WOOD SCREW

2 X 6 X 16"

SUN