Instructions / Assembly

SUN RAYS ON INSIDE OF

ROOF SUPPORTS

(ROOF REMOVED FOR CLARITY)

STEP 39: SUN RAYS

1: All the sun ray pieces get installed to the inside surface of the Roof Supports and Sun

pieces.

2: Place the 5/4 x 2 x 17” Large Ray centered under the peak of the Roof Supports. Attach

the Large Ray to the Roof Support and Sun with two 1-1/2” wood screws.

3: Arrange six 5/4 x 2 x 13” Small Rays on either side of the Large ray (three small rays per side)

as shown below. Attach each Small Ray to the Roof Support and Sun with two 1-1/2” wood

screws.

4: Repeat substeps 2 and 3 for the other side of the roof.

LARGE RAY

5/4 X 2 X 17"

5/4 X 2 X 13"

SMALL RAY

1-1/2"

WOOD SCREWS