Instructions / Assembly

STEP 42: SLIDES

1: Lay Slides on deck with the lip extending onto/over the Deck Spacer.

2: Secure each Slide to the Deck Spacer with two #8 x 1-1/4” wood screws

* DO NOT OVER TIGHTEN*

3: Once slide is installed DO NOT lift the end of the slide. DO NOT bump the slide with

a lawn mower. These actions and any other actions which crack the slide where the

screws are fastened to the deck are not covered by your warranty.

* DO NOT PICK UP SLIDE FROM BOTTOM ONCE INSTALLED*

#8 x 1-1/4"

WOOD SCREWS

*DO NOT OVER TIGHTEN*