Instructions / Assembly

1: Thread one end of the Rope through the hole in the Rock Wall Side Top Panel Board.
2: Tie a secure knot on the inside of the Rock Wall Side Top Panel Board.
3: Thread the other end of the Rope through the hole in the Bottom Rock Wall Board.
Pull the Rope tight and tie a secure knot behind the Bottom Rock Wall Board.
4: Note: you may tie two knots in the Rope to aid in climbing if you wish. Do this before
performing sub step 3.
5: Once the Rope is tied on both ends attempt to wrap the rope around your hand. If
the rope wraps around your hand it is too loose. Untie one end and retie the rope until
you can no longer wrap it around your hand.
STEP 44: CLIMBING ROPE
YOU MAY TIE
TWO KNOTS
IN THE ROPE
TO AID IN
CLIMBING IF
YOU WISH.
TIE A KNOT BEHIND
THIS HOLE IN THE
ROCK WALL SIDE
TOP PANEL BOARD
73