Instructions / Assembly

STEERING WHEEL

INSERT

END OF SWING BEAM

AT THE FORT DECK.

STEERING WHEEL

INCLUDED

HARDWARE

STEERING

WHEEL

CAP

STEP 46: STEERING WHEEL

1: Place the Steering Wheel Insert inside the Steering Wheel.

2: Predrill an 11/64" hole about 2" deep into the end of the Swing Beam. Use the hardware

included (one 3/8 x 2-1/2” lag screw and one 3/8” washer) with the Steering Wheel to mount

the Steering Wheel to the end of the Swing Beam. DO NOT over-tighten the lag screw into

the Steering Wheel Insert or the Steering Wheel will not turn.

3: Place the Steering Wheel Cap over the center of the Steering Wheel and snap into

place inside the Steering Wheel Insert.