Instructions / Assembly

2 X 4 X 51-1/8"

ROOF SUPPORT-RIGHT

2 X 4 X 51-1/8"

ROOF PEAK SUPPORT

5/4 X 6 X 10"

COUNTERSUNK HOLE FACES UP

ROOF SUPPORT-LEFT

USE A CARPENTERS SQUARE TOMAKE

THESE PARTS SQUARE TO ONE ANOTHER.

STEP 53: ROOF SUPPORT ASSEMBLIES

COMPLETED ROOF

SUPPORT ASSEMBLY

(MAKE FOUR)

1: LOCATE FOUR 2 X 4 X 51-1/8" ROOF SUPPORT (LEFT), FOUR 2 X 4 X 51-1/8" ROOF SUPPORT

(RIGHT) AND FOUR 5/4 X 6 X 10" ROOF PEAK SUPPORT PIECES.

2: FIND A FLAT SURFACE TO WORK ON. LAY THE ROOF SUPPORTS DOWN ON THE FLAT SURFACE

WITH THE COUNTERSUNK HOLES FACING UP. ALIGN THE ANGLED ENDS OF THE ROOF SUPPORTS

FLUSH WITH ONE ANOTHER. PLACE A ROOF PEAK SUPPORT ON TOP OF THE ROOF SUPPORTS AS

SHOWN. THE EDGES SHOULD BE FLUSH WHERE SHOWN BELOW.

3: USE FOUR #8 X 2" WOOD SCREWS TO ATTACH THE ROOF PEAK SUPPORT TO THE ROOF

SUPPORTS AS SHOWN BELOW.

4: MAKE THREE MORE ROOF SUPPORT ASSEMBLIES BY REPEATING 2 AND 3.

FLUSH

DETAIL B

SCALE 1 : 5

WOOD SCREW

#8 X 2"

FLUSH

102