Instructions / Assembly

SIDE BOTTOM
PANEL BOARD
2 X 6 X 30-7/16"
VIEW. SEE
A
PANEL BOARD
REAR BOTTOM
2 X 6 X 42-1/2"
ABOVE.)
2 X 6 X 30-7/16"
SIDE BOTTOM
PANEL BOARD
(HIDDEN FROM
B
RIGHT
SIDE OF
FORT
2 X 6 X 30-7/16"
SIDE BOTTOM
PANEL BOARD
5/16" X 4-1/2"
HEX BOLT WITH
5/16"WASHER (1X)
5/16" X 3-1/2"
LAG SCREW WITH
5/16"WASHER (3 X)
DETAIL B
SCALE 1 : 9
5/16" X 3-1/2
LAG SCREWS
WITH 5/16"
WASHERS
BOTTOM PANEL BOARD INSTALLED IN SUBSTEP 1. FASTEN THE REAR BOTTOM PANEL
SIDE OF THE UPPER LEVEL. MAKE THE TOP OF THE BOARD EVEN WITH THE TOP OF THE SIDE
BEAM SIDE (RIGHT SIDE) OF THE PLAYSET. ATTACH THE TOP HOLES OF THE BOARD TO THE
BOARD TO THE POSTS WITH 5/16" X 3-1/2" LAG SCREWS AND 5/16" WASHERS.
WITH 5/16" X 3-1/2" LAG SCREWS AND 5/16" WASHERS.
POSTS WITH 5/16" X 4-1/2" HEX BOLTS AND 5/16" WASHERS. ATTACH THE BOTTOM HOLES
2: PLACE THE 2 X 6 X 42-1/2" REAR BOTTOM PANEL BOARD (OFFSET DOWN) ON THE BACK
STEP 39: UPPER LEVEL BOTTOM PANEL BOARDS
1: PLACE THE 2 X 6 X 30-7/16" SIDE BOTTOM PANEL BOARD (OFFSET UP) ON THE SWING
3: PLACE THE 2 X 6 X 30-7/16" SIDE BOTTOM PANEL BOARD
(OFFSET UP) ON THE LADDER SIDE (LEFT SIDE) OF THE
PLAYSET. ATTACH THE TOP LEFT HOLE OF THE BOARD TO
THE REAR CORNER POST WITH A 5/16" X 4-1/2" HEX BOLT
AND A 5/16" WASHER. LEVEL THE BOARD. NOW INSTALL
5/16" X 3-1/2" LAG SCREWS WITH 5/16" WASHERS IN THE
REMAINING HOLES.
5/16" X 3-1/2"
SCALE 1 : 9
LAG SCREW
DETAIL A
5/16"
WASHERS
5/16" X 4-1/2"
HEX BOLT
88