Instructions / Assembly

DETAIL A

Lag Screw

5/16" x 2"

5/16" Washer

STEP 11: ATTACH MONKEY BARS

1: PLACE THE MONKEY BARS ON TOP OF THE MONKEY BAR SUPPORT 5" AWAY FROM THE

END OF THE MONKEY BAR SUPPORT.

2: CENTER THE HOLES IN THE 90 BRACKETS ON THE MONKEY BAR SUPPORT.

3: PREDRILL 9/64" HOLES BY 2" DEEP AT THE CENTER OF EACH 90 BRACKET. FASTEN THE

BRACKETS AS SHOWN.

4: TIGHTEN THE 1-1/2" BOLTS THAT SECURE THE 90 BRACKET TO THE RUNNERS.