Instructions / Assembly

Carriage Bolt

Torque Washer

3/8" Washer

3/8" x 6"

3/8" Lock Nut

1851AF

SWING BEAM MOUNT

1851AI

CORNER POST 2

STEP 1: SWING BEAM MOUNT

1: PLACE THE TORQUE WASHERS OVER THE END OF THE CARRIAGE BOLTS AS SHOWN

WITH THE TEETH FACING AWAY FROM THE HEAD OF THE BOLT. HAMMER THE HEAD OF THE

BOLT TO SET THE TEETH INTO THE CORNER POSTS.

2: FASTEN THE SWING BEAM MOUNT WITH WASHERS AND LOCK NUTS.