Instructions / Assembly

#8 X 1-1/2"

Wood

Screw

1851A

LADDER

BACK

T-Nut

5/16" x 1-1/2" Hex Bolt

FLUSH

5/16" Washer

5/16" Lock Washer

Bracket

T-Nut

Screw

#8 X 2"

Wood

FLUSH

1851AD

LADDER SIDE R/H

1851AC

LADDER SIDE L/H

1851Q

LADDER STEP

STEP 20: LADDER ASSEMBLY

1: INSTALL A T-NUT INTO EACH OF THE LADDER SIDES.

2: PLACE ONE OF THE LADDER SIDES ON THE GROUND WITH THE CHANNELS FACING UP.

3: INSERT THE LADDER STEPS INTO THE CHANNELS AND PLACE THE SECOND LADDER SIDE ON TOP.

4: FLUSH THE FRONT CORNER OF EACH STEP TO THE FRONT OF THE LADDER SIDE. THEN FASTEN THE STEP TO

THE LADDER SIDE WITH TWO SCREWS. REPEAT FOR THE OTHER STEPS.

5: FLIP THE LADDER OVER AND REPEAT SUBSTEP 4 FOR THE OTHER SIDE.

6: MEASURE DOWN 4-3/8" ON THE BACK SIDE OF THE LADDER AND MAKE MARKS. ALIGN THE LADDER

BACK AND FASTEN WITH FOUR SCREWS.

7: INSTALL TWO 90

BRACKETS ON THE INSIDE OF THE LADDER SIDES.