Instructions / Assembly

STEP 41: TARP

1: PLACE THE TARP ACROSS THE TARP BOARDS WITH THE HEMS ON THE INSIDE.

2: WRAP THE ENDS OF THE TARP EQUALLY AROUND THE END TARP BOARDS.

NOTE: IF YOU WISH YOU MAY PREDRILL 1/8" PILOT HOLES BY 3/4" DEEP FOR THE PAN HEAD

SCREWS.

3: INSTALL A SCREW AND WASHER AT EACH GROMMET.

#14 x 1"

SCALE 1 : 2

DETAIL A

(3 per side)

Pan Head Screw

(3 per side)

1/4"

Washer

Tarp Grommet