Instructions / Assembly

#8 X 2-1/2"

Wood Screws

FLUSH FLUSH

GROUND RUNNER

MONKEY BAR

LADDER SIDES

MONKEY BAR

SQUARE

STEP 4: MONKEY BAR LADDER

1: CAREFULLY FLIP THE LADDER ASSEMBLY OVER SO THE MONKEY BAR GROUND RUNNER

IS FACING UP.

2: USE A SQUARE TO SQUARE THE LADDER SIDES TO THE MONKEY BAR GROUND RUNNER.

THE BOTTOM OF EACH LADDER SIDE SHOULD BE FLUSH TO THE BOTTOM OF THE GROUND

RUNNER.

3: THE HOLES IN THE MONKEY BAR GROUND RUNNER SHOULD BE CENTERED OVER EACH

MONKEY BAR LADDER SIDE. IF THE HOLES ARE NOT CENTERED PERFECTLY THAT SHOULD

NOT MATTER AS LONG AS THE LADDER SIDE IS SQUARE TO THE GROUND RUNNER.

4: FASTEN THE MONKEY BAR GROUND RUNNER TO THE LADDER SIDES WITH SCREWS.

5: TIGHTEN UP ALL OF THE BOLTS.